Search

Menu

Contact us

MORA-TOP, s.r.o.

©umperská 1349
783 91 Uničov
Czech Republic

tel.: +420 588 499 911
fax: +420 588 499 902

e-mail:

Certificate

Certifikát ISO9001

FLOW WATER HEATERS

VEGA - new

Flow water heater, VEGA

The VEGA flow water heater is a brand new "star" launched by MORA-TOP.

As one of the stars of the summer triangle, VEGA shines in the Lyra constellation, with brightness much higher than that of the Sun.

Thanks to its minimum dimensions, modern design and particularly its excellent properties, the VEGA flow water heater outweighs all competitors in its category.

VEGA - main dimensions (pdf)
VEGA - technical data (pdf)

BASIC DATA

TypeRated capacity kWQuantity of hot water at 25 °CDesign (gas)
VEGA 10.N01217,3 kW10 l / minnatural gas
VEGA 13.N01222,6 kW13 l / minnatural gas
VEGA 16.N01226,4 kW15,2 l / minnatural gas
VEGA 10E.N02217,3 kW10 l / minnatural gas
VEGA 13E.N02222,6 kW13 l / minnatural gas
VEGA 16E.N02226,4 kW15,2 l / minnatural gas
VEGA 10.N01317,3 kW10 l / minLPG
VEGA 13.N01322,6 kW13 l / minLPG
VEGA 16.N01326,4 kW15,2 l / minLPG
VEGA 10E.N02317,3 kW10 l / minLPG
VEGA 13E.N02322,6 kW13 l / minLPG
VEGA 16E.N02326,4 kW15,2 l / minLPG

Design

  • Piezoelectric ignition (VEGA 10, 13, 16)
  • Cell battery ignition (VEGA 10E, 13E, 16E)
  • Combustion gases exhausted to a chimney with a minimum dimension of the gas branch
  • Natural gas (N012, N022)
  • Bottled gas, LPG (N013, N023)

Advantages

  • Small
  • User friendly
  • Automatic operation
  • Gas saving of up to 10 %
  • High efficiency - up to 92 %
  • Most efficient form of water heating
  • Continuous output control
  • Maintaining water at a pre-set temperature

Dimensions

  • One of the most compact heaters on the market
  • Height - 592 mm
  • Width - 320 mm
  • Depth - 245 mm
  • Minimum flue duct diameter - 110 mm

Comfort

  • The VEGA flow water heater is comprises a combined armature supplied by Mertik (Germany), enabling the heater to be activated even with water flow as low as 2.5 l/min.
  • The Mertik armature also features the function of an automatic regulation of pre-set temperature which is very important in case the water pressure in the water mains drops down.

Economy

  • In the category of gas water heaters, VEGA offers the highest efficiency in the world, i.e. almost 92 %
  • Thanks to the low but high-efficiency exchanger, the heater begins heating water by 15 % faster than any other heater.

Reliability

Reliability is guaranteed thanks to a number of sophisticated design solutions:

  • Unlike in solutions used by all other manufacturers, the combined Mertik armature is of a lever design. This principle helps avoid a problem most usually encountered by flow heaters, i.e. water flow through an untight point where the water and gas armature are connected, which requires the replacement of the entire component.
  • The exchanger pipeline is provided with special swirl vanes preventing from scale build-up inside the exchanger inner walls and guaranteeing fast water heating.
  • The exchanger is made of pipes with the diameter of 18 mm which not only helps significantly reduce salt sedimentation but also provides effective cooling of the exchanger walls to avoid overheating of the heater walls.

Safety

  • High reliability and safety of the appliance in connection with the CE European standard
  • Water temperature regulation preventing from water overheating in the heat exchanger
  • Thanks to the reverse thrust protection piece, combustion gases cannot enter the room even if the chimney gets clogged
  • The flame safety device monitors the proper functioning of the main and ignition burner
  • The heater will not allow the main burner to activate without the presence of water

Accessories

  • Connecting set consisting of 1/2" stainless steel flexible hoses, including nuts, and sealing (not part of the heater)
  • Adaptor to chimney and gas branch, ROS-110/120 and 110/130 mm (optional)